开奖结果蓝月亮精选枓

technical article

Dust removal process of boiler desulfurization dust collector

发布时间:2019-04-18 10:31:57 浏览次数:136次 Source: admin Release time: 2019-04-18 10:31:57 Views: 136 times
Speaking of boiler desulfurization precipitator, I believe everyone is very familiar with it, it is a commonly used dedusting equipment in many enterprises. However, although some friends often use it, but little is known about it, then the following editor will introduce the dust removal process of the boiler desulfurization and dust collector.
1. The process of exhausting the relatively clean airflow from the exhaust port after dust removal.
2. Dust extraction process After the boiler desulfurization and dust collector passes through the separation interface, the separated dust is discharged through the dust outlet. 3. When the high-concentration dust flow flows to the separation interface during the separation phase, The diffusion and agglomeration tendency is mainly agglomeration. Particles can agglomerate with each other, and can also agglomerate and adsorb on the substantial interface.
4. Capture and separation The essence of the process of capture and separation of desulfurization and dust collector is the concentration stage of dust. The dust uniformly mixed or suspended in the carrier medium enters the dust removal space of the dust collector. Due to the effect of external force, the dust is moved to the separation interface. As the dust moves toward the separation interface, the concentration becomes larger and larger, which further prepares for solid-gas separation.
The above is the dust removal process of the boiler desulfurization and dust collector. I hope it can be helpful to everyone.

Previous: How does the glass fiber reinforced plastic absorption tower achieve purification function?

Next: What are the production requirements for FRP water tanks?